Test anvil for the concrete hammer


Make: Metlor

Model: CL-1011

Origin: India

Standards: EN 12390-4, BS 1881 and ASTM C39 (with suitable platen set)

General description: Used for the verification of the calibration of the concrete test hammers. Special steel alloy made.

Dimensions: dia. 150 by 320 mm.
Weight: 16 kg

The EN 12504:2 Specification requires obligatory the use of the anvil for the hammer tests.
The Standard specifies:
– Before a sequence of tests on a concrete surface, take and record readings using the steel reference anvil and check to ensure that they are within the range recommended by the manufacturer. If they are not, clean and/or adjust the hammer.


Scroll to Top