Demulsibility Bath


Make: Metlor

Model: SL-FT-023

Standard: ASTM D2711

Test Method
Tests the ability of medium to high viscosity oils to separate from water when water contamination and turbulence are encountered. The sample is stirred together with distilled water for 5 min. at constant temperature. After a specified settling period, the degree of separation is measured by volume and the percentage of water in oil is determined. For lighter oils and synthetic fluids, the ASTM D1401 Water Separability Test is used.

. Conforms to the specifications of ASTM D2711
. Variable stirrer speed
. Choice of digital or analog bath models

Stirrer – Complete stirrer assembly per Fig. 1 and 2 of ASTM D2711, including variable high speed drive motor, stainless steel propeller shaft, top, center and bottom bearings, and steel motor housing with positioning plate.

Constant Temperature Baths – Standard model holds two Stirrers and two Separatory Funnels in proper alignment for demulsibility characteristics testing. Stirrers mount securely on a stainless steel support plate having brackets for testing and drainage positions. Separate motor speed controls are provided for each stirrer. All wetted parts are constructed of stainless steel.

Microprocessor digital temperature control with dual LED displays for setpoint and actual temperatures and an illuminated bath interior with window for viewing sample cylinders. Digital LED speed control is provided for each stirrer.


Conforms to the specifications of : ASTM D2711
Capacity: Two (2) sample-water mixtures
Maximum Temperature: 212°F (100°C)
Temperature Control: Microprocessor digital control with LED display
Bath Medium: 9 gal (38.5L) water
Electrical Requirements: 115V 60Hz  ;  220-240V 50/60 Hz ;  


WxDxH in (cm) : 15.1/4x15x37(39x38x94)
Net Weight: 72 lbs (32.6kg)

Shipping Information:

Shipping Weight : 133 lbs (60.3kg)
Dimensions: 25.4 Cu. ft.

Scroll to Top