Make:Metlor Model: SL-FT-030 Standard: ASTM D1177 Determines the freezing point of aqueous engine coolant solutions by cooling a sample with continuous agitation until a plateau is observed in a time-temperature curve. Conforms to ASTM D1177 specifications. Product Description The Labtek electric freezing point apparatus is a manual freezing point apparatus. Double tube Ø 30 x 240 […]
Make: Metlor Model: SL-FT-029 Standard: ASTM D611; IP 2; ISO 2977; DIN 51775; FTM 791-3601; NF M 07-021 Product Description Thin Film Aniline Point Apparatus conforms to ASTM D611 and related specifications. For aniline point and mixed aniline point determinations according to Method B. Stirs aniline-sample mixture in a borosilicate glass thin film tube suspended in
Make: Metlor Model: SL-FT-028 Standard: ASTM D445, D2170, D6074, D6158; IP 71, 319; ISO 3104; DIN 51550; FTM 791-305; NF T 60-100 Kinematic viscosity is of primary importance in the design and selection of a wide range of petroleum products. Calibrated capillary viscometers are used to measure flow under gravity or vacuum at precisely controlled
Make: Metlor Model: SL-FT-027 Standard: ASTM D323, D1267Measures the vapor pressure of automobile and aviation gasoline, petroleum products and crude oils. Conforms to ASTM D323, D1267 and related specifications RVP bath provides high accuracy programmable temperature control Vapor pressure is a critical factor in the handling and performance of liquid petroleum and liquefied petroleum gas
Make: Metlor Model: SL-FT-026 Standard: ASTM D524, D6074; IP 14; ISO 4262; FTM 791-5002; NF T 60-117 Test Method: Determines the ‘carbon residue’ left after evaporation and pyrolysis of a sample oil in the Ramsbottom furnace, providing an indication of the deposit forming tendencies of fuels and guidelines for the processing of refinery products. Ramsbottom Carbon Residue
Make: Metlor Model: SL-FT-025 Standard: ASTM D86 Description: Automatic distillation range tester is used for determination of distillation range of petroleum products according to the test method , complying with ASTM D86 and IP123. This instrument will automatically control the heating process and distillation speed, as well as record and print all record data. Feature:(1)
Make: Metlor Model: SL-FT-024 Standard: ASTM D130; IP 154 FSPT DT-28-65; ISO 2160; DIN 51759; FTM 791-5325; NF M 07-015 Test Method: The Copper Strip Tarnish Test assesses the relative degree of corrosivity of petroleum products, including aviation fuels, automotive gasoline, natural gasoline, solvents, kerosene, diesel fuel, distillate fuel oil, lubricating oil and other products. A polished
Make: Metlor Model: SL-FT-023 Standard: ASTM D2711 Test MethodTests the ability of medium to high viscosity oils to separate from water when water contamination and turbulence are encountered. The sample is stirred together with distilled water for 5 min. at constant temperature. After a specified settling period, the degree of separation is measured by volume
Make: Metlor Model: SL-FT-022 Standard: ASTM D2584, ASTM D5630, ISO 3451 Scope: An Ash test is used to determine if a material is filled. The test will identify the total filler content. It cannot identify individual percentages in multi-filled materials without additional test procedures being performed. An ash test cannot be used to determine the percent
Make: Metlor Model: SL-FT-021 Utilizing forced air circulation, hot air ovens are used in laboratories to perform effect of ageing on various physical properties of any type of materials including yarns, fabrics and paper etc; in addition, these forced air convection ovens are also used for high quality drying and baking applications in the field of laboratory,
